Opis produktu
DPT-Ctrl jest wielofunkcyjnym sterownikiem PID wyposażonym w przetwornik różnicy ciśnień lub przetwornik przepływu.
DPT-Ctrl może być wykorzystany do stabilizacji ciśnienia, wydajności wentylatorów, w systemach VAV (stabilizacji temperatury przy zmiennych wartościach nawiewów) lub do sterowania przepustnicami. Dwurzędowy wyświetlacz wskazuje jednocześnie wartość sygnału sterującego i wartość mierzoną. Możliwe jest ustawienie zarówno sygnału napięciowego jak i prądowego na obu wyjściach regulatora (sterującym i pomiarowym ciśnienia lub przepływu). Opcjonalna funkcja automatycznego zerowania eliminuje konieczność okresowych kalibracji punktu zerowego.
Dane techniczne
Accuracy (at applied pressure):
Model 2500:
Pressure < 125 Pa = 1 % + ±2 Pa
Pressure > 125 Pa = 1 % + ±1 Pa
Model 7000:
Pressure < 125 Pa = 1.5 % + ±2 Pa
Pressure > 125 Pa = 1.5 % + ±1 Pa
(Accuracy specifications include: general accuracy,
temperature drift, linearity, hysteresis, long term
stability, and repetition error)
Thermal effects:
Temperature compensated across the full spectrum of
capability
Overpressure:
Proof pressure: 25 kPa
Zero point calibration:
Automatic autozero or
manual pushbutton
Response time:
1.0−20 s, selectable via menu
Media compatibility:
Dry air or non-aggressive gases
Controller parameter (selectabe via menu):
Setpoint 0…2500/7000 Pa
P-band 0…100 000
I-time 0…1000 s
D-factor 0…100
Pressure units (select via menu):
Pa, kPa, mbar, inWC, mmWC, psi
Flow units (select via menu):
Volume: m3/s, m3/hr, cfm, l/s
Velocity: m/s, ft/min
Measuring element:
MEMS
Environment:
Operating temperature: -10…50 °C, with autozero (-AZ) calibration -5…50 °C
Storage temperature: -20…70 °C
Humidity: 0 to 95 % rH, non condensing
Dimensions:
Case: 90.0 x 95.0 x 36.0 mm
Weight:
150 g
Mounting:
2 each 4.3 mm screw holes, one slotted
Materials:
Case: ABS
Lid: PC
Protection standard:
IP54
Display
2-line display (12 characters/line)
Line 1: Direction of control output
Line 2: Pressure or air flow measurement, selectable via menu
Size: 46.0 x 14.5 mm
Electrical connections:
4-screw terminal block
Wire: 0.2–1.5 mm2 (12–24 AWG)
Cable entry:
Strain relief: M16
Knockout : 16 mm
Pressure fittings:
5.2 mm barbed brass
+ High pressure
− Low pressure
Voltage:
Circuit: 3-wire (V Out, 24 V, GND)
Input: 24 VAC or VDC, ±10 %
Output: 0–10 V, selectable via jumper
Power consumption: <1.0 W
Resistance minimum: 1 kΩ
Current:
Circuit: 3-wire (mA Out, 24 V, GND)
Input: 24 VAC or VDC, ±10 %
Output: 4–20 mA, selectable via jumper
Power consumption: <1.2 W
Maximum load: 500 Ω
Conformance
Meets requirements for CE marking:
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
WEEE Directive 2012/19/EU
Zastosowanie
Przetworniki DPT-Ctrl są powszechnie stosowane w systemach HVAC/R (wentylacji, klimatyzacji, ogrzewania) w celu:
• Stabilizacji ciśnienia różnicowego w centralach wentylacyjnych
• aplikacjach VAV
Informacje dodatkowe
Kod produktu |
Opis produktu |
Zakres pomiarowy(Pa) |
103.007.102 |
DPT-Ctrl-2500-D |
0…2500 |
103.007.103 |
DPT-Ctrl-2500-AZ-D |
0…2500 |
103.016.044 |
DPT-Ctrl-7000-D |
0…7000 |
103.016.045 |
DPT-Ctrl-7000-AZ-D |
0…7000 |
-D wyświetlacz
-AZ automatyczne zerowanie